Bowl collaboration

Here are some photos from my bowl made from Mahogany. There was a an error in the video which these photos weren't shown. 

EDIT(28/07/2015 19:26 GMT the photos are infact included)

Electrical solder wall storage

 I am starting this project with a pine varnished pine tongue and groove floor board and iI preceded to mark to lines 4"/100mm apart.

 I then clamped a simple circular saw guide lining up the mark.

 after it was cut I then took as hand plane in my case I used a Stanley #5 but a #4 would work fine its just a little easer with the longer body of the #5 .